Same-Day Service, Monday–Friday

Pipe Repair & Replacement
in Louisville, KY

A burst line, a pinhole leak dripping through the ceiling, a frozen pipe in the crawl space, or old galvanized choking your water pressure — our licensed Louisville plumbers find it, fix it in copper or PEX, and quote the price before the first cut.

Request Free Estimate (502) 402-9967

Google Reviews

Licensed & Insured

Same-Day Service

Upfront Pricing

Louisville’s Pipe Repair Experts

Find the Leak, Fix the Pipe, Not Just the Symptom

Water goes where it wants, so the stain on the ceiling is rarely under the leak. We trace it — supply or drain, hot or cold, joint or pipe wall — before we open anything, and we open as little as the repair needs. Simple repairs start around $260–$390 and are usually done in one visit.

Louisville houses hold every pipe material of the last century: copper with pinhole corrosion, galvanized steel rusted nearly shut, cast iron drains cracked at the hub, CPVC gone brittle, and PEX from the last remodel. We repair all of them and we will tell you plainly when a section has reached the end and a repipe costs less than the third repair.

The first thing to do with an active leak is close the water: the fixture valve, or the main at the meter or where the line enters the house. Ask us about your water shutoff shows you where to look. Then call; a shut valve turns an emergency into an appointment.

See All Pipe Services ↓

What We Do

Pipe Repair Services We Offer in Louisville, KY

From a single joint to a whole-house repipe — every job priced before we start, never after.

Burst & Leaking Pipe Repair

A burst line or a spraying joint gets same-day priority, Monday through Friday. We close the water, open the smallest section that will do, replace the failed pipe, and pressure-test before we close up.

Same-day priority during business hours
Supply and drain lines
Smallest opening the repair allows
Pressure-tested before closing
Simple repairs from $260–$390

Leak Detection

Ceiling stain, damp floor, a water bill that doubled: we trace the leak with pressure testing, moisture readings and, where it helps, a camera or acoustic listening, so the wall we open is the right one.

Pressure and moisture testing
Hot vs. cold line isolation
Slab and crawl-space leaks
One opening, not three
Cause explained before repair

Frozen Pipe Thawing & Repair

Louisville winters freeze pipes in crawl spaces, garages and exterior walls. We thaw the line safely, find the split the ice left behind, repair it, and insulate or reroute it so it does not happen next January.

Safe thawing, no open flame
Split sections found and replaced
Insulation and heat tape
Reroute out of cold walls
Hose bib and crawl-space lines

Copper, PEX, PVC & CPVC Repair

Every material comes apart differently. Copper is soldered or pressed, PEX is crimped or expanded, CPVC is solvent-welded and goes brittle with age. We carry the fittings for all of them on the truck.

Pinhole and joint leaks in copper
PEX crimp, clamp and expansion
Brittle CPVC replaced in PEX
Drain line PVC repairs
Fittings stocked on the truck

Galvanized & Cast Iron Replacement

Galvanized supply pipe rusts shut from the inside and cast iron drains crack at the hubs. When either is failing, we replace the run — a section or the whole house — in copper, PEX or PVC.

Restores lost water pressure
Stops rusty water for good
Section or whole-house
Cast iron drain hub repairs
Quoted after a walk-through

Whole-House Repipe

When the third leak in a year shows up in a house full of old pipe, patching stops making sense. We repipe in PEX or copper, room by room, with the water off for hours rather than days.

PEX or copper, your choice
Water off for hours, not days
Walls opened only where needed
Drywall patched or left for your finisher
Fixed price for the whole job

How It Works

How We Find a Leak You Cannot See

The stain is rarely under the leak. Here is how we make sure the wall we open is the right one.

Isolate the system

Supply or drain? Hot or cold? We shut valves one at a time and watch the meter and the pressure gauge. That narrows the leak to one line before anything is opened.

Read the moisture

A moisture meter maps where the water actually is behind the drywall or under the floor, which is often several feet from the stain.

Look inside

Where it helps, a camera through a small opening, a drain camera, or acoustic listening for a slab leak confirms the spot.

Open once and fix it

One opening at the leak, the failed section replaced, the line pressure-tested, and a straight answer on whether the rest of the run is next.

Repair or Repipe?

Should You Repair the Pipe or Replace the Run?

We will always give you an honest recommendation. Here is the guide we use ourselves.

Repair Makes Sense When...

It is one leak at one joint or one short section
The pipe is copper, PEX or PVC in good condition
It froze once because of a gap or a missing insulation, not the layout
The rest of the run looks sound when we open the wall
It is the first leak the line has had
Repair cost is well under a third of a repipe

Replacement Makes Sense When...

The pipe is galvanized steel or the water runs rusty
Copper shows pinholes in more than one place
This is the second or third leak on the same run
CPVC is brittle and cracks when touched
Pressure is low at every faucet in the house
You are opening the walls anyway for a remodel

Talk to a Louisville Plumber Today

Why Golden Plumbing

Why Louisville Homeowners Call Us for Pipe Repair

Same-Day Leak Repair

A burst or spraying pipe goes to the front of the line. Call before 6 PM, Monday through Friday, and a truck stocked with copper, PEX and every fitting between is usually there the same day.

Upfront, Honest Pricing

Simple repairs start around $260–$390 and you approve the number before the first cut. A repipe gets a fixed price for the whole job, not an hourly guess.

We Find It Before We Open It

Pressure tests, moisture readings and a camera mean one opening at the leak, not three exploratory holes in your drywall.

4.8 ★ · 480+ Google Reviews

Louisville homeowners rate us for showing up when we say we will, explaining the problem plainly, and leaving the house clean.

Licensed & Insured in Kentucky

Every Golden Plumbing technician is fully licensed and insured, and every repipe is permitted and inspected where Louisville requires it.

One-Year Workmanship Warranty

Pipe repairs and repipes carry a one-year workmanship warranty. If a joint we made leaks, we come back and make it right at no charge.

Stop the Leak Today

Pipe Leak in Louisville? We’re Ready.

Same-day appointments Monday through Friday across Louisville and the surrounding metro. Free estimates, upfront pricing, and the work guaranteed for a year.

Request Free Estimate (502) 402-9967

FAQ

Pipe Repair Questions — Answered

How much does pipe repair cost in Louisville?

Simple repairs — one joint, one short section, an accessible pinhole — start around $260–$390. A leak inside a wall or under a slab costs more because of the access, and a repipe is quoted as a fixed price after a walk-through. Whatever the job, you get the price before any work begins and it does not change after.

Can you do same-day pipe repair?

Yes, Monday through Friday. A burst pipe or an active leak goes to the front of the line; call before 6 PM and we are usually there the same day. Close the water first — the fixture valve or the main — and the damage stops while you wait. After 6 PM or on a weekend, shut the water off, book online or leave a message, and we call you first thing the next business morning.

What are the signs I need pipe repair?

Low water pressure, discolored or rusty water, damp spots or stains on walls and ceilings, a water bill that jumped with no change in use, a musty crawl space, banging pipes, and visible corrosion or a green crust on copper joints. Any one of them is worth a look before it becomes a ceiling on the floor.

What types of pipe do you work with?

Copper, PEX, PVC, CPVC, cast iron and galvanized steel. Old Louisville houses often have three of them in one wall. We repair all of them, and we replace galvanized, brittle CPVC and cracked cast iron rather than patching what is going to fail again.

Do you offer trenchless repair?

For sewer and drain lines, yes — lining and pipe bursting when the camera shows the line is a candidate. That work has its own page with prices: sewer line repair. For water supply lines, a buried leak is usually a spot dig at the leak, which the locator finds first.

My pipe froze. What do I do right now?

Open the faucet the frozen line feeds, so pressure has somewhere to go when it thaws. Warm the area gently — a space heater in the room, never a torch on the pipe — and call. Ice splits pipe as it forms, and the leak shows up after the thaw. Frozen pipes in Louisville has the full checklist.

How do you find a hidden water leak?

We narrow it down in steps: shut valves one at a time and watch the meter, map the moisture behind the wall with a meter, then confirm the spot with a camera or sound listening before we cut. Electronic leak detection in the pricebook runs about $150–$200 for a moisture-meter check and $500–$600 to locate an underground line leak, and you approve the price first.

Will you have to open a wall?

Sometimes, but only one, and only at the leak. Pressure testing, a moisture meter and a camera tell us where the water is before we cut. If the repair is in a crawl space or basement, nothing gets opened at all. If a wall has to be opened, you hear it and price it first.

Leak Detection

How Leak Detection Works in a Louisville Home

Leak detection means finding the exact spot a pipe is leaking before anyone cuts into a wall or digs a yard. We do it with a pressure and meter test, a moisture meter, and a camera or sound listening where the leak is hidden, so you pay to open one place instead of three.

What the method depends on

Inside a wall or ceiling: a moisture meter maps where the water is. In-wall leak detection runs about $350–$450.
A quick check: an electronic moisture-meter leak check runs about $150–$200 and takes under an hour.
Underground supply line: sound sensing or pressurized gas locates the break. That work runs about $500–$600.

What you get

You get the location of the leak, the repair price, and a straight answer on whether the rest of the run is sound. Repairs carry a one-year workmanship warranty. Our work is done under the license of William Riley, KY Master Plumber #6590.

Not sure where to start? Close the water at the fixture valve or the main, then Ask us about your water shutoff and call. A water bill that jumped with no change in use is a common sign of a hidden leak.